Delivery Date      Secure Payment     Returns Policy    

20 mm x 30 mm x 1.5 mm Aluminium T- Section

£ 3.98 £ 4.1
Category: T-SECTION
Length Unit Price (ex VAT) Qty
1 metre £ 3.98
2 metre £ 7.97
3 metre £ 11.95
4 metre £ 15.94
5 metre £ 19.92
6 metre £ 23.9
Custom Size Add More
£ 0.00
Add to Wishlist

The profiles constituting this category are obtained by press extrusion.

They are made of aluminum alloy n ° 6060 (AGST5) according to standards NFA 50411, NFA 50710, NFA 91450. The profiles are made from alloy n ° 6060 QUALITY BUILDING where tolerances for the impurity rate are much lower than those authorized by the standard.

Applications

Alloy 6060 is typically used for extrusions with complex cross sections and/or requiring anodising:

- Architectural sections for windows, doors, curtain walls

- Interior fittings, frame systems, lighting, ladders, railings, fences

- Heat sink sections, electronic modules, electro motor housings

- Flexible assembly systems, special machinery elements

- Truck and trailer flooring, pneumatic installation, railway, inside applications

- Irrigation, heating and cooling pipes

- Furniture, office equipment.

The profiles constituting this category are obtained by press extrusion.

They are made of aluminum alloy n ° 6060 (AGST5) according to standards NFA 50411, NFA 50710, NFA 91450. The profiles are made from alloy n ° 6060 QUALITY BUILDING where tolerances for the impurity rate are much lower than those authorized by the standard.

Applications

Alloy 6060 is typically used for extrusions with complex cross sections and/or requiring anodising:

- Architectural sections for windows, doors, curtain walls

- Interior fittings, frame systems, lighting, ladders, railings, fences

- Heat sink sections, electronic modules, electro motor housings

- Flexible assembly systems, special machinery elements

- Truck and trailer flooring, pneumatic installation, railway, inside applications

- Irrigation, heating and cooling pipes

- Furniture, office equipment.

Proof Stress 120 Min MPa

Tensile Strength 160 Min MPa

Elongation A50 mm 6 Min %

Hardness Brinell 60 HB

Elongation A 8 Min %

Magnesium (Mg) 0.35 - 0.60

Silicon (Si) 0.30 - 0.60

Iron (Fe) 0.10 - 0.30

Zinc (Zn) 0.0 - 0.15

Others (Total) 0.0 - 0.15

Titanium (Ti) 0.0 - 0.10

Manganese (Mn) 0.0 - 0.10

Copper (Cu) 0.0 - 0.10

Other (Each) 0.0 - 0.05

Chromium (Cr) 0.0 - 0.05

Aluminium (Al) Balance

Weldability – Gas: Good

Weldability – Arc: Very Good

Weldability – Resistance: Good

Brazability: Very Good

Solderability: Good

0 review for 20 mm x 30 mm x 1.5 mm Aluminium T- Section

Add a review

Your email address will not be published. Required fields are marked

Your rating